Adguard crashes when trying to launch or install it

jultsu

New Member
Hi,

I've had some intermittent issues with Adguard for a while now, back when I was using Mojave and now again with Catalina 10.15.4 (19E266)
The application was installed and ran fine, then the battery died and I presume the machine did a hard shutdown. Plugged it in and rebooted back to macOS and now it won't start, just crashes every time.

Upon application launch (and subsequent crash), I get the following report with personal machine ID removed:
Code:
Crashed Thread:        0

Exception Type:        EXC_CRASH (Code Signature Invalid)
Exception Codes:       0x0000000000000000, 0x0000000000000000
Exception Note:        EXC_CORPSE_NOTIFY

Termination Reason:    Namespace CODESIGNING, Code 0x1

kernel messages:

VM Regions Near 0 (cr2):
-->
    __TEXT                 0000000100e25000-0000000100fe1000 [ 1776K] r-x/r-x SM=COW 

Thread 0 Crashed:
0   ???                               0x0000000103287000 _dyld_start + 0

Thread 0 crashed with X86 Thread State (64-bit):
  rax: 0x0000000000000000  rbx: 0x0000000000000000  rcx: 0x0000000000000000  rdx: 0x0000000000000000
  rdi: 0x0000000000000000  rsi: 0x0000000000000000  rbp: 0x0000000000000000  rsp: 0x00007ffeeeddac50
   r8: 0x0000000000000000   r9: 0x0000000000000000  r10: 0x0000000000000000  r11: 0x0000000000000000
  r12: 0x0000000000000000  r13: 0x0000000000000000  r14: 0x0000000000000000  r15: 0x0000000000000000
  rip: 0x0000000103287000  rfl: 0x0000000000000200  cr2: 0x0000000000000000
 
Logical CPU:     0
Error Code:      0x00000000
Trap Number:     0


Binary Images:
       0x100e25000 -        0x100fe0fff +??? (0) <0E58E90F-EEBC-3D3C-A317-ADA94E612AF4> (null)
       0x103286000 -        0x103317eff +??? (750.5) <1F893B81-89A5-3502-8510-95B97B9F730D> (null)

External Modification Summary:
  Calls made by other processes targeting this process:
    task_for_pid: 0
    thread_create: 0
    thread_set_state: 0
  Calls made by this process:
    task_for_pid: 0
    thread_create: 0
    thread_set_state: 0
  Calls made by all processes on this machine:
    task_for_pid: 622
    thread_create: 0
    thread_set_state: 0

VM Region Summary:
ReadOnly portion of Libraries: Total=2752K resident=0K(0%) swapped_out_or_unallocated=2752K(100%)
Writable regions: Total=8420K written=0K(0%) resident=0K(0%) swapped_out=0K(0%) unallocated=8420K(100%)
 
                                VIRTUAL   REGION
REGION TYPE                        SIZE    COUNT (non-coalesced)
===========                     =======  =======
STACK GUARD                       56.0M        1
Stack                             8192K        1
__DATA                             668K        4
__DATA_CONST                        20K        1
__LINKEDIT                         392K        2
__TEXT                            2360K        2
shared memory                        8K        2
===========                     =======  =======
TOTAL                             67.4M       13

When trying to install the latest Adguard version downloaded from the website, I get this error:

1595852943784.png

Code:
Crashed Thread:        Unknown

Exception Type:        EXC_CRASH (Code Signature Invalid)
Exception Codes:       0x0000000000000000, 0x0000000000000000
Exception Note:        EXC_CORPSE_NOTIFY

Termination Reason:    Namespace CODESIGNING, Code 0x1

kernel messages:

Backtrace not available

Unknown thread crashed with X86 Thread State (64-bit):
  rax: 0x0000000000000000  rbx: 0x0000000000000000  rcx: 0x0000000000000000  rdx: 0x0000000000000000
  rdi: 0x0000000000000000  rsi: 0x0000000000000000  rbp: 0x0000000000000000  rsp: 0x00007ffee2c6dbf0
   r8: 0x0000000000000000   r9: 0x0000000000000000  r10: 0x0000000000000000  r11: 0x0000000000000000
  r12: 0x0000000000000000  r13: 0x0000000000000000  r14: 0x0000000000000000  r15: 0x0000000000000000
  rip: 0x000000011a6f0000  rfl: 0x0000000000000200  cr2: 0x0000000000000000
 
Logical CPU:     0
Error Code:      0x00000000
Trap Number:     0


Binary images description not available


External Modification Summary:
  Calls made by other processes targeting this process:
    task_for_pid: 0
    thread_create: 0
    thread_set_state: 0
  Calls made by this process:
    task_for_pid: 0
    thread_create: 0
    thread_set_state: 0
  Calls made by all processes on this machine:
    task_for_pid: 977
    thread_create: 0
    thread_set_state: 0


Any ideas? A full reboot after the shutdown did nothing to help.
 

jultsu

New Member
Hi,
thanks for the link, but no help, same crash again with same termination reason. This time the installer runs through ok though (probably because it's not trying to launch the app during the installation process?)

Code:
Crashed Thread:        0

Exception Type:        EXC_CRASH (Code Signature Invalid)
Exception Codes:       0x0000000000000000, 0x0000000000000000
Exception Note:        EXC_CORPSE_NOTIFY

Termination Reason:    Namespace CODESIGNING, Code 0x1

kernel messages:

VM Regions Near 0 (cr2):
-->
    __TEXT                 000000010148d000-00000001016d6000 [ 2340K] r-x/r-x SM=COW

Thread 0 Crashed:
0   ???                               0x0000000109bd0000 _dyld_start + 0

Thread 0 crashed with X86 Thread State (64-bit):
  rax: 0x0000000000000000  rbx: 0x0000000000000000  rcx: 0x0000000000000000  rdx: 0x0000000000000000
  rdi: 0x0000000000000000  rsi: 0x0000000000000000  rbp: 0x0000000000000000  rsp: 0x00007ffeee772c50
   r8: 0x0000000000000000   r9: 0x0000000000000000  r10: 0x0000000000000000  r11: 0x0000000000000000
  r12: 0x0000000000000000  r13: 0x0000000000000000  r14: 0x0000000000000000  r15: 0x0000000000000000
  rip: 0x0000000109bd0000  rfl: 0x0000000000000200  cr2: 0x0000000000000000

Logical CPU:     0
Error Code:      0x00000000
Trap Number:     0


Binary Images:
       0x10148d000 -        0x1016d5ff7 +??? (0) <3A9F9E56-99B7-3393-BF97-0B44755D7243> (null)
       0x109bcf000 -        0x109c60eff +??? (750.5) <1F893B81-89A5-3502-8510-95B97B9F730D> (null)

External Modification Summary:
  Calls made by other processes targeting this process:
    task_for_pid: 0
    thread_create: 0
    thread_set_state: 0
  Calls made by this process:
    task_for_pid: 0
    thread_create: 0
    thread_set_state: 0
  Calls made by all processes on this machine:
    task_for_pid: 5714
    thread_create: 0
    thread_set_state: 0

VM Region Summary:
ReadOnly portion of Libraries: Total=3388K resident=0K(0%) swapped_out_or_unallocated=3388K(100%)
Writable regions: Total=8440K written=0K(0%) resident=0K(0%) swapped_out=0K(0%) unallocated=8440K(100%)

                                VIRTUAL   REGION
REGION TYPE                        SIZE    COUNT (non-coalesced)
===========                     =======  =======
STACK GUARD                       56.0M        1
Stack                             8192K        1
__DATA                             852K        4
__DATA_CONST                        20K        1
__LINKEDIT                         464K        2
__TEXT                            2924K        2
shared memory                        8K        2
===========                     =======  =======
TOTAL                             68.2M       13
 

jultsu

New Member
Code:
Crashed Thread:        0

Exception Type:        EXC_CRASH (Code Signature Invalid)
Exception Codes:       0x0000000000000000, 0x0000000000000000
Exception Note:        EXC_CORPSE_NOTIFY

Termination Reason:    Namespace CODESIGNING, Code 0x1

kernel messages:

VM Regions Near 0 (cr2):
-->
    __TEXT                 000000010caee000-000000010cd37000 [ 2340K] r-x/r-x SM=COW 

Thread 0 Crashed:
0   ???                               0x000000010d50b000 _dyld_start + 0

Thread 0 crashed with X86 Thread State (64-bit):
  rax: 0x0000000000000000  rbx: 0x0000000000000000  rcx: 0x0000000000000000  rdx: 0x0000000000000000
  rdi: 0x0000000000000000  rsi: 0x0000000000000000  rbp: 0x0000000000000000  rsp: 0x00007ffee3111c50
   r8: 0x0000000000000000   r9: 0x0000000000000000  r10: 0x0000000000000000  r11: 0x0000000000000000
  r12: 0x0000000000000000  r13: 0x0000000000000000  r14: 0x0000000000000000  r15: 0x0000000000000000
  rip: 0x000000010d50b000  rfl: 0x0000000000000200  cr2: 0x0000000000000000
 
Logical CPU:     0
Error Code:      0x00000000
Trap Number:     0


Binary Images:
       0x10caee000 -        0x10cd36ff7 +??? (0) <3A9F9E56-99B7-3393-BF97-0B44755D7243> (null)
       0x10d50a000 -        0x10d59beff +??? (750.5) <1F893B81-89A5-3502-8510-95B97B9F730D> (null)

External Modification Summary:
  Calls made by other processes targeting this process:
    task_for_pid: 31
    thread_create: 0
    thread_set_state: 0
  Calls made by this process:
    task_for_pid: 0
    thread_create: 0
    thread_set_state: 0
  Calls made by all processes on this machine:
    task_for_pid: 48705
    thread_create: 0
    thread_set_state: 0

VM Region Summary:
ReadOnly portion of Libraries: Total=3388K resident=0K(0%) swapped_out_or_unallocated=3388K(100%)
Writable regions: Total=8440K written=0K(0%) resident=0K(0%) swapped_out=0K(0%) unallocated=8440K(100%)
 
                                VIRTUAL   REGION
REGION TYPE                        SIZE    COUNT (non-coalesced)
===========                     =======  =======
STACK GUARD                       56.0M        1
Stack                             8192K        1
__DATA                             852K        4
__DATA_CONST                        20K        1
__LINKEDIT                         464K        2
__TEXT                            2924K        2
shared memory                        8K        2
===========                     =======  =======
TOTAL                             68.2M       13
 

jultsu

New Member
Ok, seems to have been a user error after all. Did PRAM + SMC zaps and after booting back to Catalina, the "welcome" screen greeted me. Thanks anyways for the support!
 
Top