[AdGuard for Windows] Beta v.6.0.224 RC

[mysteriously]

When Adguard is enabled, I sometimes have an issue with links. Random webpages seem to be fully loaded but clicking on links does not cause any actions.

Uh, I can not load http://forums.guru3d.com/forumdisplay.php?f=46 again Yesterday when Adguard certificate was not present in FF cert database, the website worked fine.

 

[Phonemes]

Vasily,

Yes, it happens when opening websites. I have seen it happen a few times with extra scam tabs that opened when following links on Avaxhome and/or Nitroflare. An extra tab opened and was replaced with this message after a second or so. But it is not limited to those sites and not to extra tabs opening. Not sure about https, I'll watch out for that when it happens again and report back.

Edit: This occurs with both http and https pages.

 

[Blaz]

@avatar
Is there a bug with exclusions?

http://xcdnx.blogspot.com.au/2016/04/zenex-tv2.html

When I use the following rule, adblocker detection is showing, but when I add only one top level domain (blogspot.com.au), the adblock detection is not shown and therefore the rule is working.
@@||blogspot.de,blogspot.com,blogspot.com.au^$generichide

The same applies to rule like this:
blogspot.de,blogspot.com,blogspot.com.au#%#AG_onLoad(function() { setTimeout(function() { document.getElementById("g207").style.display="none";}, 100); });

 

[avatar]

Hi Blaz, it just does not work that way.

This part of the rule is a URL, it is not a domains list:

||blogspot.de,blogspot.com,blogspot.com.au

So in your case you should either add this rule for all three domains:

@@||blogspot.*^$generichide

Or three different rules.

---------- Post added at 01:03 PM ---------- Previous post was at 12:20 PM ----------

When Adguard is enabled, I sometimes have an issue with links. Random webpages seem to be fully loaded but clicking on links does not cause any actions.

Uh, I can not load http://forums.guru3d.com/forumdisplay.php?f=46 again Yesterday when Adguard certificate was not present in FF cert database, the website worked fine.

Please get the build from the last comment here:
https://github.com/AdguardTeam/AdguardForWindows/issues/1025

 

[Blaz]

And about the other rule?

 

[avatar]

And about the other rule?

The other rule is ok, injected into all three domains.

The problem with that rule is that g207 element may not exist so exception will be thrown possibly breaking other JS on the page.

 

[mysteriously]

Please get the build from the last comment here:
https://github.com/AdguardTeam/AdguardForWindows/issues/1025

1st load - FF didn't load anything. Refresh - not fully loaded (like on the screenshoot above). Couple reloads later still the same. Couple reloads with skipping cache - still no luck.
I use WFP driver on Win10 x64.

The uninstall utility does not auto scroll down the log. 2 cmd windows pop out on foreground. Also the utility does not seem to be translated.
[OFFTOP]500 posts. YaY! [/OFFTOP]

 

[vasily_bagirov]

New release candidate is out, I have updated the topicstarter.

 

[Blaz]

Please add an option regarding the following change:
[Changed] Adguard window is now opened with a single click on tray menu #1030

Every other tray icon is opened via double click and it is weird to have one with a single click.

 

[avatar]

Every other tray icon is opened via double click and it is weird to have one with a single click.

I disagree. Take onenote for instance, it is opened with a single click.

There should be an action on a single click.

---------- Post added at 07:28 PM ---------- Previous post was at 07:27 PM ----------

1st load - FF didn't load anything. Refresh - not fully loaded (like on the screenshoot above). Couple reloads later still the same. Couple reloads with skipping cache - still no luck.
I use WFP driver on Win10 x64.

Do you always test it on guru3d.com?

 

[vasily_bagirov]

1st load - FF didn't load anything. Refresh - not fully loaded (like on the screenshoot above). Couple reloads later still the same. Couple reloads with skipping cache - still no luck.
I use WFP driver on Win10 x64.

I will have to check this. Is all the info about your Adguard settings in the signature up to date?

The uninstall utility does not auto scroll down the log. 2 cmd windows pop out on foreground. Also the utility does not seem to be translated.

We don't consider this a big flaw. The tool is meant to be used only in rare situations, and a couple of cmd windows is not a big deal. Scrolling the logs is also not crucial since they are meant for the support rather than for user. Not a lot of users will be interested in these logs anyway.

500 posts. YaY!

My congratulations!

 

[Blaz]

OK, then the majority is opened with double click and I dislike this change. A single click should just open the context menu like the right click does.

 

[Boo Berry]

I actually like the single click change.

 

[vasily_bagirov]

Please add an option regarding the following change:
[Changed] Adguard window is now opened with a single click on tray menu #1030

Every other tray icon is opened via double click and it is weird to have one with a single click.

But it is still opened on double-click too. It is just that now one click will suffice as well.

 

[Blaz]

I just don't like it when I accidentely click on it via my remote to control my PC and then have to close it again.

 

[Phonemes]

Secure Connection Failed (1fichier.com)

Installed the latest beta yesterday and am getting "secure connection failed" messages every time after I upload a file to my paid 1fichier account. The files upload without problems but the connection appears to fail as soon as the files have finished uploading. I never had this with previous versions. However, I did report "the connection was reset" messages with the previous beta in post #19 of this thread. Up to now with this latest beta, I have only seen connection resets on 1fichier.com.

This is what Firefox tells me once a file has finished uploading:

Secure Connection Failed

The connection to the server was reset while the page was loading.
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.


Edit: I have to correct what I said earlier. Files do not always upload fully before the connection is reset. I just lost two uploads because the connection to 1fichier was reset.

 

[Phonemes]

Microsoft.Net Framework error when closing AG GUI

Got an error from Microsoft.Net Framework when I closed the GUI. A black rectangle remains where the GUI's window used to be and AdGuard's icon remains visible in the taskbar. Clicking "close window" from that icon doesn't do anything. Guess I am going to have to reboot to get rid of the black rectangle. I have reported problems with AdGuard's GUI on several occasions, sometimes in connection with crashes of my Nvidia graphic driver. I'm attaching the error report as a text file.

View attachment NetFrameWorkError.txt

 

[vasily_bagirov]

Got an error from Microsoft.Net Framework when I closed the GUI. A black rectangle remains where the GUI's window used to be and AdGuard's icon remains visible in the taskbar. Clicking "close window" from that icon doesn't do anything. Guess I am going to have to reboot to get rid of the black rectangle. I have reported problems with AdGuard's GUI on several occasions, sometimes in connection with crashes of my Nvidia graphic driver. I'm attaching the error report as a text file.

View attachment 4965

Could you please try to force using the integrated graphics card via the Nvidia interface? I assume you have integrated graphics card when I say this. It would be very interesting to see the results.

Installed the latest beta yesterday and am getting "secure connection failed" messages every time after I upload a file to my paid 1fichier account.

I wasn't able to reproduce this issue, although maybe I was doing something wrong. Are you able to reproduce it in other browsers? Do you see any similar errors on other websites?

 

[Phonemes]

Could you please try to force using the integrated graphics card via the Nvidia interface? I assume you have integrated graphics card when I say this. It would be very interesting to see the results.

I wasn't able to reproduce this issue, although maybe I was doing something wrong. Are you able to reproduce it in other browsers? Do you see any similar errors on other websites?

I already tried setting the Intel Graphic Card as the default a while ago, but got some instability issues. Will see if I have more succes tomorrow.

Did an upload in IE and exactly the same thing happened. It disconnected as soon as the upload finished and gave a "page cannot be displayed" warning. Were you logged in at 1fichier.com when you uploaded that file? Maybe it only happens when one is logged in?

Edit: Uploaded a file to Nitroflare (for which I have a paid subscription as well) and no problems occured. There was no disconnect after the upload.

Edit 2: Just checked my device manager and it looks like the screen is now driven by the Intel graphics driver. The Nvidia driver that was causing me trouble drove a second monitor that I have since disconnected.

 

[Boo Berry]

Okay, has exclusion rules been changed at some point lately? Let's say in the filtering log there's a request from http://profile.accounts.firefox.com/v1/profile and let's say I want to add it as an exclusion using the following rule; @@||accounts.firefox.com$document

Once adding that rule, that domain should be whitelisted, right? It doesn't seem to be that was as subsequent page loads (and even closing and reopening the browser) still indicates the request is still being filtered/not excluded even though there's an exclusion in the user filter. And yes, the user filter is enabled and is working. Same thing with other domains as well.

---------- Post added at 07:26 PM ---------- Previous post was at 07:22 PM ----------

There's also the issue where the main router page seems to be loading indefinitely (thus causing an inability to login): http://forum.adguard.com/showthread.php?10595-Windows-v6-0-223-1092-Router-page-loading-indefinitely

Anyone else confirm?