Early Access: AdGuard 6.0 Alpha Version

avatar · Sep 2, 2015

Blaz said:
New custom subscription:
When manually entering an IP address like "\\1.2.3.4" and a txt file in the path and then when you click somewhere else (doesn't matter where), the program hangs due to network check. Would be good if the user could have a button to abort the search.

https://github.com/AdguardTeam/AdguardForWindows/issues/172

EDIT: When only entering junk in the field like "345jko5aseljkf sadif023i0o rj ioaesi0f sia0f " or just the simple letter "a" or even when the field is empty the red block says invalid, but when I press on Install "EstonianList" gets installed.

https://github.com/AdguardTeam/AdguardForWindows/issues/174

Would be also good when the user enters something in the path field and then presses Enter button it would try to install it.

https://github.com/AdguardTeam/AdguardForWindows/issues/173

When I press on "Add filter" and I press on the close button in top right corner while it still says loading, the window gets correctly closed, but when Adguard got the list of filter subscriptions the window shows up which it shouldn't.

I guess we should remove close button in progress dialogs:
https://github.com/AdguardTeam/AdguardForWindows/issues/175

When removing a filter in confirmation window, when Exit button (top right corner) it shouldn't be possible to press on "OK" at the same time. When doing both, the confirmation window shows up again.

I didn't get it, could you take a screenshot?

When entering a lot of junk into the path window, the red error message box gets very large, see attached screenshot:
When I continue to add crap into that field, Adguard crashes (tested in my Windows 8.1 x64 machine). Best would be to limited the path to 200 characters.

https://github.com/AdguardTeam/AdguardForWindows/issues/176

We'll limit it to 1024 characters, 200 is too short.

EDIT2: Filtered Apps add Application allows adding other files than executables, tested with a zip file from the internet "http://winhelp2002.mvps.org/hosts.zip".

https://github.com/AdguardTeam/AdguardForWindows/issues/177

Parental Control user list is only checking account list on startup it seems as I just deleted/added a user and main gui didn't refresh. It should refresh when the main gui window is opened again and not only when Adguard.exe gets started.

https://github.com/AdguardTeam/AdguardForWindows/issues/178

In White/Blacklist it is possible to enter an empty site and therefore the nice button "Add site" is not shown.

Should be fixed in new alpha:
https://github.com/AdguardTeam/AdguardForWindows/issues/54

BTW is it possible to set different levels of Parental Control for different users?
I also hope the typos are fixed soon I reported in my Translation ticket.

Not yet, but you can file a feature request on github

---------- Post added at 08:48 PM ---------- Previous post was at 08:47 PM ----------

rkkdjb said:
Well the URLs I mentioned at Post #255 can be linked to that issue or used as reference points for future testing.
Have also edited that post with link to exact pages where its effect could be felt and what it's not blocking.
If u need anymore details,tell me

Part of the URLs there shouldn't be blocked anyway, the only thing which should have been blocked is doubleclick.

Blaz · Sep 2, 2015

avatar said:
I didn't get it, could you take a screenshot?

No need for a screenshot. With the mouse I move over the close button (the X in top right corner of that dialogue) and then I press the mouse button and the enter key on my keyboard at the same time and the dialogue is coming back.

avatar said:
Not yet, but you can file a feature request on github

I'm not on github

---------- Post added at 08:05 PM ---------- Previous post was at 07:51 PM ----------

I like the new Alpha already which comes soon (already translated the new strings

)

avatar · Sep 2, 2015

Blaz said:
No need for a screenshot. With the mouse I move over the close button (the X in top right corner of that dialogue) and then I press the mouse button and the enter key on my keyboard at the same time and the dialogue is coming back.

Just to make it clear, do you mean this dialog:
http://screencast.com/t/Fe2VYczGS

I'm not on github

Heh, you can create a new thread here on the forum then

Blaz · Sep 2, 2015

Yes, exactly that dialogue

I already created a post in the forum in this thread.
If you are talking about the typos in English version, it is in my translation ticket.

---------- Post added at 10:14 PM ---------- Previous post was at 10:06 PM ----------

Support dialogue allows opening ticket with email "1@253oi0oawe05r0oiaseolkklfkopweso0-ir-o32o0-i4r0-qwaoefopksakodfplk23o4-05r5awko0rfsdafsadfawsd"

1. Enter every detail as usual (valid email address)
2. Now change the email address to something invalid and then press on "Send message" (even with missing top level domain it is working)

It even allows the mail address 1@.de (even when clicking on message afterwards).

The message box should have a scrollbar or it only works via mouse wheel when user is entering a lot.

When entering a lot and copy pasting it a lot times (big content), Adguard hangs.

After it completed hanging and adding a lot of content, it crashes.

Anwendung: Adguard.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.OutOfMemoryException
Stapel:
bei System.Windows.Threading.ExceptionWrapper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
bei System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
bei System.Windows.Threading.Dispatcher.Invoke(System.Windows.Threading.DispatcherPriority, System.Delegate, System.Object)
bei System.Windows.Interop.HwndSource.OnPreprocessMessageThunk(System.Windows.Interop.MSG ByRef, Boolean ByRef)
bei System.Windows.Interop.HwndSource+WeakEventPreprocessMessage.OnPreprocessMessage(System.Windows.Interop.MSG ByRef, Boolean ByRef)
bei System.Windows.Interop.ComponentDispatcherThread.RaiseThreadMessage(System.Windows.Interop.MSG ByRef)
bei System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
bei System.Windows.Threading.Dispatcher.PushFrame(System.Windows.Threading.DispatcherFrame)
bei System.Windows.Application.RunDispatcher(System.Object)
bei System.Windows.Application.RunInternal(System.Windows.Window)
bei System.Windows.Application.Run(System.Windows.Window)
bei Adguard.App.Main()

Name der fehlerhaften Anwendung: Adguard.exe, Version: 6.0.41.184, Zeitstempel: 0x55e08dfd
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17415, Zeitstempel: 0x54504ade
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00014598
ID des fehlerhaften Prozesses: 0x37d4
Startzeit der fehlerhaften Anwendung: 0x01d0e59f166ce6c0
Pfad der fehlerhaften Anwendung: C:\Program Files (x86)\Adguard\Adguard.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: fc00acd0-51af-11e5-bfed-f079598c0090
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Problemsignatur:
P1: Adguard.exe
P2: 6.0.41.184
P3: 55e08dfd
P4: mscorlib
P5: 4.6.96.0
P6: 55b96801
P7: 63e9
P8: 7a
P9: System.OutOfMemoryException
P10:

I do have 16 GB RAM installed.
Windows Error Reporting file: View attachment Report.zip

In settings the keyboard jump key should be underlined (E for Extensions, P for Parental Control etc.). The same applies to when you click on the language list-box.

avatar · Sep 2, 2015

Blaz said:
Yes, exactly that dialogue

It is standard windows control and this retry on enter+close looks more like a feature to me

Blaz said:
I already created a post in the forum in this thread.
If you are talking about the typos in English version, it is in my translation ticket.

I am about parental control users feature request. I mean it's better to create a new forum thread in feature requests section, it's too huge to leave it in this thread.

Support dialogue allows opening ticket with email "1@253oi0oawe05r0oiaseolkklfkopweso0-ir-o32o0-i4r0-qwaoefopksakodfplk23o4-05r5awko0rfsdafsadfawsd"

https://github.com/AdguardTeam/AdguardForWindows/issues/183

The message box should have a scrollbar or it only works via mouse wheel when user is entering a lot.

https://github.com/AdguardTeam/AdguardForWindows/issues/182

When entering a lot and copy pasting it a lot times (big content), Adguard hangs.

https://github.com/AdguardTeam/AdguardForWindows/issues/181

In settings the keyboard jump key should be underlined (E for Extensions, P for Parental Control etc.). The same applies to when you click on the language list-box.

This pattern is ok for standard toolbar menus, but not in our case with sidebar menu.

---------- Post added at 01:43 AM ---------- Previous post was at 01:42 AM ----------

steve1209 said:
If I disable protection the systray Icon does not change from the green checkmark to anything else to let me know protection is disabled!

It is strange, I cannot reproduce it. How do you disable protection? Through tray menu or clicking on the button in main window?

deleted · Sep 3, 2015

steve1209 said:
Adguard Alpha 6 version 2,

If I disable protection the systray Icon does not change from the green checkmark to anything else to let me know protection is disabled!

Hello Steve here it displays correctly to show Adguard Status:-

1) Adguard Protection is enabled.
2) Adguard Protection is disabled.
3) Adguard Service is not running/disabled/or there is a problem related to AG service.

and it's the same whether I disable it from Main GUI or tray icon.

avatar · Sep 3, 2015

The issue is resolved. We'll also change color indication from blue to yellow:
https://github.com/AdguardTeam/AdguardForWindows/issues/186

deleted · Sep 3, 2015

1) Adguard Filter Update Time is ahead of System time :-

and no I didn't mess(forward/backward) with system timings.

---------- Post added at 04:21 PM ---------- Previous post was at 04:07 PM ----------

2) Suppose I have 3 filter list : English, Spyware,Social.
In Filter Editor, If I scroll down the list in english filter to, lets say, almost half and then open the tab of Spyware filter - it is also automatically already scrolled down to that position. IMO it shud show it from the top only.

avatar · Sep 3, 2015

rkkdjb said:
1) Adguard Filter Update Time is ahead of System time

It uses the time got from our server (which uses Moscow time).

Our local time has changed twice in the last 2 years (long story, our government is messing with daylight saving time).
Maybe because of all these changes it has somehow got out of sync with your time?

rkkdjb said:
Suppose I have 3 filter list : English, Spyware,Social.
In Filter Editor, If I scroll down the list in english filter to, lets say, almost half and then open the tab of Spyware filter - it is also automatically already scrolled down to that position. IMO it shud show it from the top only.

I've filed a bug report, minor priority.
https://github.com/AdguardTeam/AdguardForWindows/issues/194

avatar · Sep 3, 2015

New alpha version is ready:
https://github.com/AdguardTeam/AdguardForWindows/releases/tag/6.0.52.227

Added and changed:

* Migration from 5.10 to 6.0 (please test it

deleted · Sep 4, 2015

avatar said:
Fixed:
* Fixed a bug with adding custom filter subscription by browsing a file:
https://github.com/AdguardTeam/AdguardForWindows/issues/154

Not Fixed

If the local file to be browsed has a space in it, it wont install instead showing error for e.g

Code:

C:\Users\*Username*\Documents\AdguardUserFilter.txt

will be accepted

but

Code:

C:\Users\*Username*\Documents\Adguard User Filter.txt

will not be accepted.

Little Bug no big problem

Blaz · Sep 4, 2015

Just installed the update while having uTorrent running and loading and it got disconnected. Is this intended?
It is in the list of Filtered Apps, but was deactivated.

Also you should limit custom user agent as when you make it very very big, sites aren't loading and google search gives the error:

413. That’s an error.

Your client issued a request that was too large. That’s all we know.

User agent also allows entering unicode data like "香川真司", but "http://www.useragentstring.com/" and http://whatsmyuseragent.com/ just shows it as ?? ??

deleted · Sep 4, 2015

If I browse a filter list locally....from say Location C:\Users\*Username*\Documents\AdguardUserFilter.txt and then let's say I make some changes in the file and then import from the same location with the same name(after deleting the previous filter lists from AG list), Adguard loads the file in its original form and not the new one(even when the new one was saved)

mysteriously · Sep 4, 2015

http://forum.adguard.com/showthread.php?6048-Early-Access-Adguard-6-0-Alpha-Version&p=59469&viewfull=1#post59469

avatar said:
Let's have it on github then:
https://github.com/AdguardTeam/AdguardForWindows/issues/168

Infinite web pages loading seems to be gone since I switched to TDI driver.

I installed the newest alpha and got Google ads again. However encrypted.google.com is not present in x.db.

Boo Berry · Sep 4, 2015

Still no issues to report here, other than YouTube+ is still pretty flakey at times.

I haven't had a single crash in any of the 6.0 alphas thus far. Hopefully I don't jinx myself.

Blaz · Sep 4, 2015

Boo Berry, you probably didn't test the extreme way ^^

Anyway, would be nice if Adguard would show the path in unicode in Filtered Apps and would have a way to show full path (via scrollbar or via big tooltip). Maybe also context menu to open the path in Windows Explorer.

Drag'n'Drop support for executables would be also nice.

A good thing is Adguard is supporting full complete file path that Windows supports.

Also I can't start Adguard in my Sandboxie

Splash screen of Adguard is just hanging. After starting it one time the normal way it starts, but cannot connect to the service outside of the sandbox which is kind of normal (probably the reason why it first hangs on the splash screen).

mysteriously · Sep 4, 2015

Apps are not allowed to load drivers inside Sandboxie's sandbox

Boo Berry · Sep 5, 2015

Blaz said:
Boo Berry, you probably didn't test the extreme way ^^

I haven't made any changes, except not using any antivirus software except Defender (which is set to exclude all of Adguard's files including both network drivers). I've also been manually filtering Modern apps for the last month, and still no crashes which I find odd.

avatar · Sep 5, 2015

rkkdjb said:
Not Fixed

If the local file to be browsed has a space in it, it wont install instead showing error for e.g

Code:

C:\Users\*Username*\Documents\AdguardUserFilter.txt

will be accepted

but

Code:

C:\Users\*Username*\Documents\Adguard User Filter.txt

will not be accepted.

Little Bug no big problem

Reopened it, thank you!
https://github.com/AdguardTeam/AdguardForWindows/issues/154

---------- Post added at 07:13 PM ---------- Previous post was at 07:12 PM ----------

Blaz said:
Just installed the update while having uTorrent running and loading and it got disconnected. Is this intended?
It is in the list of Filtered Apps, but was deactivated.

Also you should limit custom user agent as when you make it very very big, sites aren't loading and google search gives the error:

413. That’s an error.

Your client issued a request that was too large. That’s all we know.

User agent also allows entering unicode data like "香川真司", but "http://www.useragentstring.com/" and http://whatsmyuseragent.com/ just shows it as ?? ??

Filed a bug report, thank you!

https://github.com/AdguardTeam/AdguardForWindows/issues/202

---------- Post added at 07:15 PM ---------- Previous post was at 07:13 PM ----------

rkkdjb said:
If I browse a filter list locally....from say Location C:\Users\*Username*\Documents\AdguardUserFilter.txt and then let's say I make some changes in the file and then import from the same location with the same name(after deleting the previous filter lists from AG list), Adguard loads the file in its original form and not the new one(even when the new one was saved)

Cannot reproduce this.

Also there's no need in delete-reimport, you can simply check filter updates and Adguard will load new state from that file.

---------- Post added at 07:15 PM ---------- Previous post was at 07:15 PM ----------

buuuuuuu190 said:
I installed the newest alpha and got Google ads again. However encrypted.google.com is not present in x.db.

Even after browser restart? On which browser?

---------- Post added at 07:18 PM ---------- Previous post was at 07:15 PM ----------

Blaz said:
Boo Berry, you probably didn't test the extreme way ^^

Anyway, would be nice if Adguard would show the path in unicode in Filtered Apps and would have a way to show full path (via scrollbar or via big tooltip). Maybe also context menu to open the path in Windows Explorer.

https://github.com/AdguardTeam/AdguardForWindows/issues/203

Drag'n'Drop support for executables would be also nice.

https://github.com/AdguardTeam/AdguardForWindows/issues/204

mysteriously · Sep 5, 2015

avatar said:
Even after browser restart? On which browser?

Yes. Firefox stable x86. Does not happen always, it's rather rare issue. I have HTTPS Everywhere addon.

Early Access: AdGuard 6.0 Alpha Version

Administrator

Moderator & Translator

Administrator

Moderator & Translator

Administrator

Beta Tester

Administrator

Beta Tester

Administrator

Administrator

Beta Tester

Moderator & Translator

Beta Tester

Beta Tester & Translator

Moderator + Beta Tester

Moderator & Translator

Beta Tester & Translator

Moderator + Beta Tester

Administrator

Beta Tester & Translator